Citroen Dispatching Remote Key Replacement
Prior to 1997, Citroen vehicles were equipped with keys that did not have transponders (chip). The Keylab can be programmed on site without the need for special equipment.
If your key fob isn't working, it could be due to a variety of reasons like worn buttons or battery contacts that are not making contact or water damage to the key or receiver module issues.
Fault Diagnosis
The process of fault diagnosis is one that identifies the root cause of a problem, ensuring that the corrective measures can be taken. This is commonly referred to by the term fault isolation, and is an essential component of operations management automaton systems. It comprises three steps including localization, estimation and detection.
Simulation is a standard method for diagnosing faults. It lets you test the possible response to tests when there is a presence of various faults. The results are stored in databases. Then, when an experiment is conducted and the actual results are compared against the expected ones. If the actual results are in line with one of the expected results, the corresponding fault is identified. The method of identifying faults usually iterative, and can be described as a diagnostic tree.
A car remote could be out of sync, causing it to malfunction. A mobile technician equipped with the correct equipment can repair this issue, and save you money as opposed to the service offered by a dealership. Technicians can utilize a specific tool to activate your Citroen's remote plip, returning it to working condition with the vehicle. This is a fast and simple procedure that is done in around five seconds. You can repeat this process for a second time if your first one does not work.
Dead Coin Battery
A dead battery in the coin is the most common cause of a Jumpy key fob that doesn't lock or unlock. The button cell battery inside the key fob is secured by clips of metal. Over time, these clips can be weakened and looser. Replace the old battery with a fresh one of the same voltage, size and specification. Make sure that the retainer clip has been properly installed. A button cell battery replaced incorrectly can damage the electronic chip.
Key fob is not working correctly
There are several things that could cause problems with your Citroen dispatch remote key. Most often, it's an empty battery, but it could also be a damaged or defective transmitter. You might hear loose parts moving around inside the fob, and the LED lights might not be working. In such cases you'll need to contact an auto locksmith to address your problem.
The remote car key, also known as the smart key utilizes a transponder inside the head to connect with the immobiliser of the car and will start when you insert the key. These keys are extremely popular with customers because of their convenience and dependability. The keys can also be dropped, squeezed or thrown, in contrast to the old flip-key types that are no longer used.
However it is important to remember that if the key won't start your car, it is likely that the issue lies with the immobiliser system in the vehicle and not the key itself. It's not enough to just replace the key. It must be reprogrammed with the right equipment by an auto locksmith. This will require a new transponder chip be programed into the key so that it can be used with the car and can unlock and open it from a distance without needing to physically reach the door lock.
Faulty Receiver Module
The remote keyless system receiver module allows key fobs to communicate with your vehicle. If none of the key fobs are functioning, and you have checked the battery for health and then reprogrammed them then it could be that the receiver module has developed a fault.
It could be unable to send radio frequency signals, or it could just be faulty due to aging. This is a common problem and an auto locksmith will need to replace it.
If you're a locksmith or garage you can click here to find out about our trade accounts and how you can cut down on your citroen dispatch key replacement cost. If you are not a motor trader or locksmith, then you can use the links above to order your replacement key, or call us here at KeyNOW to discuss other options.
Replacement key casing for the remote with rubber buttons for Citroen Jumpy. This item is not included in the original packaging. It was made by PSA Group for Delphi. It can be delivered in a in a blank (uncut) and/or cut to be affixed to your vehicle. Please look up the 'Key Cutting Information Tab above for more details.